Bài báo đăng trên tạp chí khoa học quốc tế

Đề tài khoa học

STT	Tác giả	Tên bài báo	Năm xuất bản	Nhà xuất bản
1	Tang Cam Nhung, Huy Du Dao and Pham Thanh Binh	Detection and diagnosis gray spots on tea leaves using computer vision and multi layer perceptron	2019	International Conference on Engineering Research and Applications,December, 2019
2	Manh Cuong Do, Manh Hung Nguyen and Nguyen Hung Do, Dao Huy Du	Design Axial Flux Permanent Magnet machine for in-wheel of Electric Vehicle	2019	International Conference on Engineering Research and Applications,December, 2019
3	Vu Duc Vuong, Nguyen Quang Hoang and Nguyen Tien Duy	Control Parallel Robots Driven by DC Motors Using Fuzzy Sliding Mode Controller and Optimizing Parameters by Genetic Algorithm	2019	International Conference on Engineering Research and Applications,December, 2019
4	Quynh Le Van, Cuong Bui Van, Long Le Xuan and Quan Do Van	Effects of Suspension Design Parameters of a Semi-trailer Truck on Vehicle Ride Comfort and Road Surface Friendliness	2019	International Conference on Engineering Research and Applications,December, 2019
5	Huy Du Dao, Pham Thanh Binh and Tang Cam Nhung	Control and Optimize Black Tea Fermentation Using Computer Vision and Optimal Control Algorithm	2019	International Conference on Engineering Research and Applications,December, 2019
6	Nam H.Nguyen, Cuong K.Pham, Hai V.Bui and Huy Du Dao	Design a temperature control system using Halogen lamp	2019	International Conference on Engineering Research and Applications,December, 2019
7	Hoa Nguyen Thi, Khoa Nhu Ngo and Ngoc Nguyen Thi Bich	New vibration model to analyze the correlation of com-ponents in the washing machine suspension system	2019	International Conference on Engineering Research and Applications,December, 2019
8	NGUYEN THI HONG CAM, VU NGOC PI, TRAN THI HONG, LE HONG KY & LUU ANH TUNG	A STUDY ON CALCULATION OF OPTIMUM GEAR RATIOS OF A TWO-STAGE HELICAL GEARBOX WITH SECOND STAGE DOUBLE GEAR SETS	2019	International Journal of Mechanical and Production Engineering Research and Development (IJMPERD) ISSN (P): 2249-6890; ISSN (E): 2249-8001; Vol. 9, Issue 2, Apr 2019, 613-620 © TJPRC Pvt. Ltd.
9	Vu Ngoc Pi, Nguyen Thi Hong Cam, Tran Thi Hong, Le Xuan Hung, Luu Anh Tung, Nguyen Khac Tuan, Hoang Thi Tham	Determination of optimum gear ratios of a two-stage helical gearbox with second stage double gear sets	2019	2019 10th International Conference on Mechatronics and Manufacturing (ICMM 2019)
10	Dao Phuong Nam Nguyen Hong Quang Dinh Nhat Anh	Cascade Motion/Force Control Strategy of nonholonomic Wheeled Mobile Robotic Systems	2019	ACM International Conference on Mechatronics and Robotic Engineering
11	Vu Ngoc pi, Tran Thi Hong, Le Xuan Hung, Luu Anh Tung, Nguyen Khac Tuan	A study on determination of optimum gear rarios of a worm-helical gearbox	2019	2019 10th International Conference on Mechatronics and Manufacturing (ICMM 2019)
12	Vu Ngoc Pi, Nguyen Khac Tuan, Le xuan Hung, Nguyen Thi Quoc Dung and Bui Thanh Hien	Determining Optimum Gear Ratios of a worm- helica gearbox for minimum acreage of the cross section	2019	2019 10th International Conference on Mechatronics and Manufacturing (ICMM 2019)
13	Vu Ngoc Pi, Nguyen Khac Tuan, Le xuan Hung, Nguyen Thi Hong Cam and Tran Thi Phuong Thao	Determining Optimum partial transmission ratios of mechanical driven systems using a V-belt drive and a three-stage helical reducer	2019	2019 10th International Conference on Mechatronics and Manufacturing (ICMM 2019)
14	Vu Ngoc Pi, Nguyen Khac Tuan va Le Xuan Hung	A new study on Calculation of optimum partical transmission ratios of mechanical driven systems using a chain drive and a two - stage helical reducer	2019	2019 10th International Conference on Mechatronics and Manufacturing (ICMM 2019)
15	Vu Ngoc Pi, Nguyen Khac Tuan, Le Xuan Hung and Luu Anh Tung	A new study on determination of optimum gear ratios of a two-stage helical gearbox	2019	2019 10th International Conference on Mechatronics and Manufacturing (ICMM 2019)
16	Tran Minh Duc1, Tran The Long*1 & Tran Quyet Chien2	Global journal of advanced engineering technologies and sciences study of mqcl performance using nanofluid in hard turning of 90crsi steel	2019	Global Journal of Advance Engineering Technology and Sciences; ISSN 2349-0292
17	DO THI TAM, NGUYEN QUOC TUAN, LE HONG KY, TRAN THI HONG & VU NGOC PI	Modelling surface finish in the inner circle machining of 90crsi tool steel using wire cut edm	2019	International Journal of Mechanical and Production Engineering Research and Development (IJMPERD) ISSN(P): 2249-6890; ISSN(E): 2249-8001 Vol. 9, Issue 3, Jun 2019, 119-124
18	Tran Thi Hong, Do Thi Tam, Nguyen Manh Cuong, Luu Anh Tung, Vu Ngoc Pi Le Hong Ky, Nguyen Quoc Tuan Nguyen Thi Hoa	Effects of process parameters on cutting speed in wire-cut edm of 9crsi tool steel	2019	International Journal of Mechanical Engineering and Technology (IJMET), Volume 10, Issue 03, March 2019, pp. 644-649. Article ID: IJMET_10_03_067 Available line at http://www.iaeme.com/ijmet/issues.asp?JType=IJMET&VType=10&IType=3 ISSN Print: 0976-6340 and ISSN Online: 0976-6359
19	Tran Thi Hong, Do Thi Tam, Nguyen Manh Cuong, Luu Anh Tung, Vu Ngoc Pi* Le Hong Ky, Nguyen Quoc Tuan Hoang Tien Dung	Effects of process parameters on surface roughness in wire-cut edm of 9crsi tool steel	2019	International Journal of Mechanical Engineering and Technology (IJMET) Volume 10, Issue 03, March 2019, pp. 1073-1078. Article ID: IJMET_10_03_108 Available online at http://www.iaeme.com/ijmet/issues.asp?JType=IJMET&VType=10&IType=3 ISSN Print: 0976-6340 and ISSN Online: 0976-6359
20	Tran Thi Hong, Nguyen Van Cuong, Le Hong Ky, Nguyen Khac Tuan, and Vu Ngoc Pi	Calculating Optimum Gear Ratios of Two Step Bevel Helical Reducer	2019	International Journal of Applied Engineering Research ISSN 0973-4562 Volume 14, Number 16 (2019) pp. 3494-3499 © Research India Publications. http://www.ripublication.com